Using the Full-Face-Fillet command:
The “Full Face Fillet” option is used for rounding or capping ribs and other exterior part features. This option uses three adjacent face sets and allows the creation of fillet geometry which is difficult or impossible to create using traditional edge-based filleting method. The image below shows an example feature using Full [...]

Objective:
Region segmentation is a way to group set of poly-faces that belong to one feature. Regions assist in alignment of the mesh data to the global coordinate system and in the selection of a region of interest for extracting the design intent and converting it to a surface. This example in detail will give instructions [...]

Objective:
This is perfect example to explore the parametric modeling capabilities of XOR. This covers few basic concepts on how to convert a mesh into a feature based solid model. It includes sectioning the mesh by planar method, basic sketching, extruding up to a region, performing cut operations and finishing up the model with constant as [...]

Objective:
This example primarily focuses on how to autosurface a part. one of the quickest way to get NURBS from a mesh data. The airbag part is first aligned using interactive alignment method and then autosurfaced to get NURBS as displayed in the image above.
Pre-requisites:
Align
Estimated Time:
30 minutes

Files Available for Download:

File Name:
File Type:
Size

Autosurfacing.pdf
Autosurfacing.stl
Autosurfacing.avi
Pdf Document
Mesh File
Video
0.66 MB
3.08 MB
95.5 [...]

Objective:
The objective of this tutorial is to learn various alignment techniques. This involves 2 data set that are used for understandingthe following
1. How to align a mesh to desired co-ordinate system using reference geometries
2. How to align a mesh to desired co-ordinate system using already segmented region groups
3. How to align a mesh to a [...]

Objective:
This tutorial will give a very detailed overview on the User Interface of Rapidform Software. It starts with basics on showing such how to pan, rotate and zoom a part, how to show and hide entities etc to advanced options such as dynamic draw. This is a very good start for any new user trying [...]

Did you know that Rapidform Softwares come with in-built Quick Start Guide and Tutorials
Show me how to use Quick Start Guide
Show me how to use Tutorials
I am missing my Tutorials/Help Files
Quick Start Guide
Quick Start Guide helps to quickly learn how to use the software and its various commands using interactive and highly descriptive examples. [...]